Apply two or three very thin coats of epoxy, extending each coat slightly beyond the previous one. This is necessary to fill any porosity in the patch. One of the steps that is frequently left out when working with gel coat is to apply a sealer coat of epoxy to the repair area. For Additional Hints, Please Refer to these JD Tech Tips:ġ. This handy guide gives a DIY boat owner the ability to repair gelcoat using WEST System Epoxy and a few other simple materials which can be obtained overnight. Though smooth and relatively durable, gelcoat, like any finish, is prone to dings and scratches. Vendors classify it one of three categories: a paint, a fiberglass supply, or an epoxy. After waxing the mold thoroughly, a polyester-based material called "gelcoat" is sprayed on every square inch of the mold. To get the mold to pop out, a release wax is used. Gel Coat: Repairing gelcoat on fiberglass boatīoat builders start with a fiberglass mold that is supported by metal on the outside (to make it structurally sound) and on the inside, a gelcoat over top of the fiberglass to make it smooth.
COLOR MATCH GEL COAT HOW TO
Īnd a how to from another site that is a wholesale distributer. Perfect match no but close enough not to be seen unless you really looked closley, I would try that first if it was mine. On the other hand you might get a close match using Marine Tex as that is what I used on my boat in the past. What you can do is is try to get a kit and I did a search for you and came up with theses.
White has so many shades that even at the factory my patcher's had a hard time patching the boats that came back from photo shoots ,boat shows and dealer meeting as they had faded after 2-3 months after being pigeon holed in the outdoor racks waiting to be shipped out to the dealers. The gelcoat is always hard to match especially after it has faded and white is really hard to match.
0 kommentar(er)
